Custom Golf Clubs

Basics of Golf Clubs

Submitted by Joel on Mon, 17/12/2007 - 15:36.

Buying Golf Clubs Online

Welcome to DIRECT CUSTOM GOLF CLUBS GUIDE — BUYING GOLF CLUBS ONLINE. Our golf guide will provide you with useful information intended to help you to a well thought out decision on what to spend your hard-earned money on a very necessary item — new golf clubs! The Basics of Golf Clubs Golf clubs are the tools we use to strike the golf ball. A golf club has three components — the Head, the Shaft and the Grip. There are strict rules on golf club designs, but the goal of clubmakers is to create golf clubs, within those rules of golf, that maximize the physics of the golfer's swing while allowing for a range of swing error to provide an accurate, long, yet forgiving shot. The better your swing, the less forgiving club you require.

A standard set of golf clubs consists of three woods (the 1-driver, 3, and 5), eight irons (3, 4, 5, 6, 7, 8, 9, and PW), and a putter — twelve clubs. The rules of golf allow you to carry fourteen clubs in your bag, so many golfers add another iron or a specialty wood and in recent years we’ve seen the introduction of a new type of club, the Hybrid (sometimes known as a rescue or utility club). After all, the more tools we have in our toolbox, the easier it is to do our job!

Woods

Woods are used to hit long shots and generally used off the tee on the longer holes, say over 250 yards. A wood is a hollow-bodied large headed golf club. Use your fairway woods (3 wood and above) when you are 175 yards or more away from the green.

The DRIVER (also called the 1 WOOD) has the lowest loft of any golf club. Loft is the angle of the club face that controls trajectory and affects distance. A driver has a loft between 7 and 12 degrees. Experienced golfers have traditionally favoured lower lofted drivers (less than 10 degrees of loft), which require much more skill to hit than higher lofted drivers.

An amazing development has occurred over the past several years something most people thought would never happen - professional golfers throwing out their low lofted drivers and opting for large-headed, higher-lofted 10 and 11-degree drivers. Their argument is that the longest drives are achieved by combining a high launch angle with lower spin. The newer, higher-lofted designs for large-headed drivers provide the higher launch angle; the new solid core golf balls provide less spin on the golf ball. This results in the longest drives. So the professionals are increasingly moving to larger headed higher lofted drivers. They get more carry with less shot error. Just like you should do!

This change is a huge reversal from prior years. During the mid to late 1990's, the average loft on the PGA Tour was around 7 degrees. However, those were difficult shots for the pros to make and the ball flight from such a low loft created lots of spin. The experts in ball flight analysis showed that the longest golf drives are achieved with a high launch angle combined with low spin. The new solid core golf balls provide that low spin which was not available in the golf balls of yesterday. A higher lofted club gives the golfer the higher launch angle.

Most PGA pros now carry drivers with lofts of 8.5 to 10 degrees or more. Non-pros should probably play drivers with lifts 10 degrees or higher. So our recommendation is follow the advice of the PGA pros and increase the loft of your driver.

Most golfers also carry 3 and 5 WOODS in their bag. A 3 wood has a loft between 15 and 18 degrees, and a 5 wood has a loft between 20 and 22 degrees. The higher the golf club number, the higher the loft. In addition, the higher the golf club number, the shorter the club. A 3 wood is generally 1/2" shorter than a Driver and so on with each successive club. However, the woods we sell higher than a 5 wood are the same length as the 5 wood. This is because the shorter the club, the smaller the arc of the swing. The smaller the arc of the swing, the less speed the golf club will have when it strikes the ball and so less distance the ball will travel. We believe that a 5 wood is short enough and while the 7 and 9 WOODS provide more forgiveness, we also want longer distance in our shots. Arghh, the physics of golf!

Why aren't woods made of wood? As the name suggests they used to be of wood, but since the 1980's woods have been made of metal. Metal has many advantages over wood — the most important to the beginning golfer being the ability to precisely mould metal to create a golf club that has PERIMETER WEIGHTING and LOW CENTER OF GRAVITY (LCG). Both of these design technologies result in golf clubs that are much more forgiving than wooden woods. Perimeter weighting helps create a larger SWEET SPOT — a larger area on the face of the club that will result in a good hit. Low center of gravity creates mass at the right place — increasing the height that the ball will launch off the club and reducing the likelihood of miss-hits into the ground.

Today, most golfers prefer 7 and 9 woods in their bag (which can only have fourteen clubs) than a 2 or 4 wood. In fact, there is now a trend to include higher numbered woods and eliminate the traditional low numbered irons in your set of golf clubs. That will be discussed in greater detail when we talk about irons. The 3 wood and 5 wood are commonly referred to as FAIRWAY WOODS, because they are most often used during the second shot of play, when you are supposed to be in the fairway of the golf hole (as opposed to in the woods!). All higher lofted woods (7, 9, 11, and so on) are commonly referred to as UTILITY WOODS.

Hybrids

Utility clubs and hybrids are a relatively recent addition to the genre of golf clubs, and they are growing in popularity because they are designed to be easier to hit for recreational golfers. In fact, they are easier to hit for all golfers, and most touring pros now carry hybrids. But they are a particularly good choice for recreational golfers.

The terms "utility clubs" and "hybrid clubs" are generally used interchangeably. They are clubs that combine elements of both woods and irons into their design. This combination of elements from both irons and woods enable the clubs to have technical features that aid in getting the ball airborne, that dampen the effects of mishits, and other things that are pluses.

Most hybrids are designed to replace long irons (2-, 3-, 4- and sometimes 5-irons, and at Direct Custom Golf Clubs we offer a number of complete Hybrid sets 3-PW which utilise these elements) in a golfer's bag, and when you hear it said that hybrids are "easier to hit," this is almost always meant in comparison to the long irons the hybrids are meant to replace. For this reason, most golfers would do well to consider, if shopping for a brand new set of clubs, a "hybrid set" or "hybrid irons set." In hybrid sets, the long irons (typically 3- and 4-irons) are replaced with utility clubs designed to hit the ball the same distances, but with greater forgiveness and other game-improvement features built in.

Hybrids-Why are they easier to hit?

Hybrids or utility clubs have truly exploded in popularity over the past couple of years. More and more golfers are taking their long irons out of their bags and replacing them with hybrids. Why? As we said earlier hybrids are so much easier to hit than long irons. But why is this? What makes them so much easier than long irons to master?

When you watch the Tour pros hit 2-, 3-, or 4-irons, you can see that these players have the swing skills to hit their conventional long irons almost as high as regular golfers hit their wedges. Average golfers cannot generate enough height with their long irons because, one, they have a much lower swing speed than pros; and, two, the recreational golfer does not have the swing skill to be able to consistently hit down and through the ball and keep their head behind the ball at impact with low-lofted irons.

Properly designed hybrid clubs that have the same loft as their long iron counterparts make it much easier to get the ball up in the air to fly because hybrids are much "thicker" than conventional long irons. This greater face-to-back dimension of the hybrid long-iron replacement heads allows the center of gravity to be positioned much farther back from the face. This, in turn, results in a much higher trajectory for a shot off a hybrid club compared to a traditional long iron of the same loft. In other words, at equal lofts the hybrid - with its center of gravity farther back from the clubface - will help the golfer get the ball up into the air on a higher trajectory than a long iron (whose center of gravity is much closer to the clubface).

Irons

Irons are generally used when you are less than 200 yards away from the green. The closer you are to the green, the higher the iron you will use. A standard set of irons consists of 3, 4, 5, 6, 7, 8, 9 IRONS and the PITCHING WEDGE (PW). The 3 and 4 irons are harder to hit than the higher number irons. Many golfers, especially ladies, seniors and higher handicap golfers, are changing to a modified standard golf set that replaces the 3 and 4 iron with higher lofted woods like the 7 and 9 woods or as we’ve discussed replace these with Hybrid clubs.

Wedges

Wedges are really just specialty irons. The first wedge is the Pitching Wedge (PW), which is usually about 48 degrees in loft. Wedges generally increase in 4-degree loft amounts. So wedges commonly come in 48, 52, 56, 60 and 64-degree lofts. We also have a very special wedge called the LAST WEDGE — which has a 68-degree loft. The PW is the highest lofted iron in a standard set and lowest loft of the wedges. Following the PW with higher lofts are the APPROACH WEDGE (AW), SAND WEDGE (SW), the LOB WEDGE (LW), the HIGH-LOB WEDGE and, finally, our Pinemeadow LAST WEDGE at 68 degrees. Wedges are extremely useful to your game and most golfers have a few of them.

Wedges are generally designed as "blade clubs" because you are close enough to the green that the game improvement design elements are less important. The need for increased shot control and shot shaping, which blade design encourages, becomes the more important technology for a good wedge design.

Putters

A PUTTER is a golf club with a special purpose: getting the ball into the hole. After you have slammed your drive 250 yards right into the middle of the fairway, hit your second shot 175 yards into the sand trap, and then wedged out onto the green, it is time to "putt for dough." The putter is used on the green and there are many style of putters: short, belly, long, bent, center-hosel, heel-toe, mallet, and so on. At Direct Custom Golf, we provide you a huge selection of putters and we have a good reason for it, which we explain next.

The Psychology of What You Carry in Your Golf Bag

Most golfers have as their minimum arsenal one set of IRONS, multiple WEDGES, several DRIVERS and a variety of PUTTERS. This is because your foursome all gets together at the tee where you use your driver. The pressure is high to perform well especially with your playing partners watching. Hopefully you end up in the fairway, spread out all over the golf course. As you work your way through the hole using your fairway woods and irons — eventually, you all come back together again on the green. So, where do you need the most weapons at your disposal? It is where the stakes are highest and the pressure to perform reaches its zenith. That is at the tee and the green. And that is why most golfers we know have multiple drivers and putters and one set of irons.

Ron Williams & Luka Cvrk